Wednesday, September 15, 2010

The Importance of a DNS Server Address

DNS stands for Domain Name System. This is the whole system of naming websites that allows your web browser to take something like site.com and find it easily. DNS servers can be any computer system or server that runs software that allows access to the Internet, and is assigned an IP (Internet Protocol) address. There are main DNS servers that contain all of the DNS and IP information. These make up the top level of the system while the lower levels branch out and contain all Internet service provider's servers and server farms used by large companies, all of which contain various DNS addresses and IP addresses.

If you are planning on getting a domain name for your site, you really don't have to know any of this information. You don't need to know what a DNS address is, what your computer's IP address is or any other similar facts. But understanding how it all works can help you if you have technical problems. At the very least, you'll have some understanding of what an IT technician might tell you when troubleshooting.

Understanding in general how DNS addresses work can also help when troubleshooting your home computer. Sometimes the browser will refuse to bring up certain websites or any websites and it's a DNS address problem within your own system. Your browser is actually working as what's known as a DNS resolver or DNS client when you use it to surf the Internet. It sends a request to the server owned by your Internet service provider to bring up a certain site and your ISP then sends that information back to you.

If your ISP isn't directly connected to the site you are trying to reach, such as a site that hosted somewhere else, it then becomes a DNS resolver which sends the request to another server to bring the information back. When you type information into your browser with words like the site.com, it turns that into the numerical IP address of the site and makes requests based on that number.

The website that you create with your domain name will have an IP address that DNS servers and clients use to allow people to view your site. If you are browsing and you're having trouble bringing up certain sites, your Internet service provider can help you by giving you the IP addresses of your DNS server so you can make sure your browser is configured properly.

The DNS name is essentially the name you type in to get a website. The DNS system is what makes using that name possible so that we don't have to type in each website's IP number to access it. It's one of those little things that you don't really need to know about, but that makes using the Internet possible for people without any technical knowledge.

Tags : Buy Cheap Anti Virus 2010 | LOWER Prices Interesting Software Save Price!

Tuesday, September 14, 2010

How to Stop Spam at Your Business

Spam is flooding inboxes, message boards, newsgroups, user comments, etc with the same message(s). The message is usually commercial advertising for quasi-legal products and services. Spam is lucrative because it costs the spammer little money to send. The brunt of the cost is borne by the recipients or carriers instead of the sender.

Email spam that is targeted at individual users can be more than just an annoyance. Spammers can distribute viruses through email messages sent to your inbox.

There are several ways to stop spam. We have outlined four methods here.

The first method for an organization is to install a corporate spam filter.

A corporate spam filter is installed on the receiving email server. There are two options for installing a corporate spam filter:


Install a spam filter with the SMTP server
The SMTP protocol is for sending email SMTP. This is the most direct and easiest method for installing a spam filter. The filter is installed on Port 25 where it inspects incoming email messages and then passes them on to the SMTP server that is listening on another port. The SMTP server then sends the message to the POP3 server, which forwards it to the email recipient.


Install a spam filter with the POP3 server
The POP3 protocol is for retrieving email. When a spam filter is installed on the POP3 server, email messages must still pass through the SMTP server. This may cause increased costs for data storage and handling.

The second method to stop spam is to contract with a third party organization. Using this method all email is directed to the third party's spam filter. Unsolicited bulk mail (spam) is deleted and the clean mail is redirected to the organization's recipient. In order for the organization's mail to go to the third party their MX (mail exchange) record must be changed at the Domain Name System (DNS).

The third method is to install a spam filter on your local computer. The majority of email clients can be configured to filter spam. Some of the configurations typically include:


Blacklist Senders
This configuration blocks a list of senders. Databases of blacklists are available on the Internet.


Whitelist Senders
This configuration allows the recipient to enter a list of email addresses that are allowed to pass thru. All others are sent to the junk email folder.


Block Top Level Domain
Some spam filters can be configured to block email from regions and even entire continents known for distributing spam such as Eastern Europe.

The final method is to install a separate spam filtering software. The software works with your email client to eliminate junk mail. This software may need to be "trained" meaning that the user must identify the unsolicited messages they receive as spam. The filtering software then uses the characteristics of the spam messages to identify and block unwanted email.

Friends Link : Video Cards Store. LOWER Prices

Monday, September 13, 2010

Recreate DNS Hosts From Export File Into a Microsoft DNS Server

The following script was created to add hosts, from a list of exported hosts and IPs originally from a unrelated DNS server's zone, into the specified Microsoft DNS server's DNS zone.

The basic usage of the script is:
CScript AddDNSHost.vbs /DNSServer:DNSServer /DNSZone:DNSZone /HostName:HostName /HostIP:HostIP

And an example:
AddDNSHost.vbs /DNSServer:192.168.0.1 /DNSZone:DNSZone.local /HostName:MyComputer /HostIP:192.168.1.123

A very simple way of constructing multiple commands can be achieved with practically any speadsheet application where column A holds the list of host names, column B holds their respected IP addresses and column C the following command (starting from row 1):

="AddDNSHost.vbs /DNSServer:192.168.0.1 /DNSZone:DNSZone.local /HostName:" & A1 & " /HostIP:" & B1

The above command can be copied once for each row. The resulting constructed command can then be directly pasted into a command prompt

'* * * * * * * * * * * Start of AddDNSHost.vbs * * * * * * * * * * *

On Error Resume Next

strDNSServer = Wscript.Arguments.Named("DNSServer")
strDNSZone = Wscript.Arguments.Named("DNSZone")
strHostName = Wscript.Arguments.Named("HostName")
strHostIP = Wscript.Arguments.Named("HostIP")

If Len(Trim(strDNSServer)) > 0 And Len(Trim(strDNSZone)) > 0 And Len(Trim(strHostName)) > 0 And Len(Trim(strHostIP)) > 0 Then
If Right(UCase(strHostName), Len(strDNSZone) + 1) "." & UCase(strDNSZone) Then
strHostName = strHostName & "." & strDNSZone
End If
intRecordClass = 1
intTTL = 600

strComputer = "."
Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!" & strComputer & "rootMicrosoftDNS")
Set objItem = objWMIService.Get("MicrosoftDNS_AType")
intReturn = objItem.CreateInstanceFromPropertyData(strDNSServer, strDNSZone, strHostName, intRecordClass, intTTL, strHostIP)
If Err.Number = 0 And intReturn = 0 Then
WScript.Echo strHostName & vbTab & "Added"
Else
WScript.Echo strHostName & vbTab & "Failed"
End If
End If

'* * * * * * * * * * * Start of AddDNSHost.vbs * * * * * * * * * * *

Recommend : Bose Headphones Store Save!

Sunday, September 12, 2010

Setup Internet Connection to Digital Video Recorder Behind Router

This is first article from two part series looking at the seemingly easy task of setting up Internet connection to security DVR. While this article will focus on general steps involved in proper connection forwarding to CCTV DVR, the part two is all about dynamic DNS support and workarounds. Before we step into the main subject, I like to explain very briefly a few key aspects of Internet connection for those of us not familiar with term like IP address, DDNS, port forwarding or IP mapping.

Terminology:

Every computer or other network device, in our case CCTV recorder has its own address called IP address, much like your home address it allows the information to find its way in enormous world of internet. IP address has four groups of numbers separated by dots; the number range is between 0 and 255. There are two separate networks that we need to take into consideration, LAN for Local Area Network and WAN for Wide Area Network. LAN has its own IP addresses and handles connection on local network devices (computers or devices located in your home or office network), if WAN IP is your home address than LAN IP would be your apartment number.

WAN IP is an external address visible to every user on the Internet. We will explain rest of the terminology as we go along.

Setup:

The best way to explain and clarify surveillance DVR connection setup is to use an example. In our example, we will setup DVR model VDV-074 from DVRExperts thru Netopia Router/Modem combo currently used by AT&T DSL provider with static IP service, I will also use Linksys WRT54G Router for Cable DSL connection. Security DVR recorder needs to be connected to the Internet through Router and Modem, in some cases Router and Modem are all in one devices, for example Netopia Routers.

For standalone Modems please connect the Internet out to WAN port, on your Router. Connect CCTV DVR and computers to available ports on the Router as well. Your Router will need to be setup now to log in to the Internet service provider and establish connection.

Netopia Router users:

Open up browser on your computer and type into the address bar your routers default IP http://

192.168.1.254. User name and password window should appear; the default user name and password for Netopia Routers are admin for user and serial number of your Router for the password.

Select Configure followed by Quick start link, type your Internet service providers user name (email address) and your ISP password. Click submit and alert icon located in upper right corner (I know it is strange), finally select save and restart. Your connection should be up in minute or so, click home link to see your connection status.

Linksys Router users:

Open up browser on your computer and type into the address bar your routers default IP [http://192.168.1.1]. User name and password window should appear; the default user name and password for Linksys routers are admin for user and admin for the password.

The home page of the router has ISP settings, type in your email address as a user name and ISP password for the password, select save or submit. The Router will restart after minute or so, log in again and go to status page to see if your connection status is UP.

If everything is ok and your connection is UP, we can now proceed to fun part of the setup process

There is great number of different security Digital Video Recorders on the market, so please follow your DVR's manual for details; I will only provide the proper settings. In the DVR menu, setup static LAN (Internal) IP for the DVR, in our example we have 3 computers and DVR. Each device has assigned LAN IP address as follows:

Computer 1 - 192.168.1.100

Computer 2 - 192.168.1.101

Computer 3 - 192.168.1.102

DVR - 192.168.1.103

The surveillance DVR will now be accessible within our network by typing its assigned internal IP (192.168.1.103) into browser or connection software. What we need now is to forward the connection from external IP (WAN) which is accessible from outside of our network to the LAN IP of the DVR (192.168.1.103).

Netopia Router users:

Select Configure followed by Advanced and finally IP Maps. IP map table should be empty, click on add and type into IP Map Entry Name text box the name of your DVR connection, in our example I just typed in DVR so I know what this IP map is for. In Internal IP address box type in 192.168.1.103, for external IP address refer to you ISP work sheet and find out what is your IP. In some cases ISP will provide more than one static IP, you can choose one of them.

Click submit and alert icon located in upper right corner, finally select save and restart.

From now on anyone requesting external IP will be forwarded to the internal IP of the DVR (192.168.1.103), therefore the connection should be established successfully.

Linksys Router users:

When setting up your DVR for access from the Internet, you will need to configure Port Forwarding on your Linksys Router. This can be accomplished in one of two ways, Specific Port Forwarding or the DMZ host. The DMZ host automatically forwards all incoming connection requests to a given IP address on your local network. Open the Applications & Gaming section of the router and choose DMZ. DMZ is not secure and should only be used with embedded, non-PC based CCTV recorders.

To expose the DVR to the Internet, enter the DVR local IP address (192.168.1.103) in the DMZ Host IP address box. In some cases you may just want to forward specific ports to your security DVR. If you are running any other device/server that hosts services available to the internet, you will want to use specific port forwarding instead of the DMZ Host, also if your DVR is PC based it is strongly recommended for security reasons, to only forward ports used by DVR connection. Open the applications & Gaming section of the router and choose Port Range Forwarding. Type in the name for the connection, starting port number, ending port number and internal IP of the DVR (192.168.1.103 in our example). Save and exit.

Your connection is now setup properly.

You probably noticed the term static IP in this article, and are wondering what that is.

Well, static IP is what the name suggests an IP that never changes. While there is no problem with internal IP selection; we can use whatever we want or prefer - the external IP, usually is dynamic. The static IP has to be requested from the ISP and is more expensive than dynamic IP. In our case we do want static IP so we have address for CCTV DVR connection that will never change.

Throughout this tutorial I have assumed that the external static IP is available.

Unfortunately in many areas it is not, or the cost is prohibitive. Don't panic yet, there is at least couple of different ways around this problem and I will try to go over each approach in my next article "How to use free dynamic DNS services for DVR connection."

Thanks To : External Harddisk Store. LOWER Prices Buy Cheap Anti Virus 2010 | LOWER Prices

Saturday, September 11, 2010

Networking Interview Questions

Here are the basic interview questions for the network administrators, system administrators and IT manager posts. These questions provide the basic information about the network communication technology, network topologies, network troubleshooting techniques, network devices and the basic overview of the LAN - WAN communication model.

What is DHCP?

DHCP stands for Dynamic Host Configuration Technology. The basic purpose of the DHCP is to assign the IP addresses and the other network configuration such as DNS, Gateway and other network settings to the client computers. DHCP reduces the administrative task of manually assigning the IP addresses to the large number of the computers in a network.

What is DNS and how it works?

DNS stands for Domain name system and it translates (converts) the host name into the IP address and IP address into to the host name. Every domain and the computer on the internet is assigned a unique IP address. The communication on the internet and in the network is based on the IP addresses. IP addresses are in this format 10.1.1.100, 220.12.1.22.3, 1.1.1.1 etc. IP addresses can't be remembered but the host names are easy to remember instead of their IP addresses.

What is a Firewall?

Firewall is a protective boundary for a network and it prevents the unauthorized access to a network. Most of the Windows operating system such as Windows XP Professional has built-in firewall utilities. There are the large number of the third party firewall software and the basic purpose of all the firewall software and hardware is same i.e. to block the unauthorized user access to a network.

What is WAN?

WAN stands for wide area network and it covers the broader geographical area. Basically there are three types of a computer network LAN (Local Area Network), MAN (Metropolitan Area Network) and WAN (Wide Area Network). The communication in a WAN is based on the Routers. A WAN network can cover a city, country or continents.

Define VOIP Communication Technology

VOIP stands for Voice over IP and this technology is used for transmitted the voice over the IP based long distance network to make phone calls. VOIP phone calls are very cheap and a large number of the corporate offices and home users are using VOIP technology to make long distance phone calls.

What is Wi Max Technology?

Wi Max is a wireless broadband technology and it is a advance shape of the Wi Fi (which was a base band technology). Wi Max supports data, video and audio communication at the same time at a very high speed up to 70 Mbps.

Define Network Gateway

Network Gateway can be software or a hardware. A gateway is usually a joining point in a network i.e. it connects two networks. A computer with two LAN cards can act as a gateway.

What is a Router?

A router routes the traffic to its destination based on the source and destination IP addresses, which are placed in the routing software known as routing table.

How Fiber Optic Cable Works

Fiber optics provides the fastest communication medium for data and voice. Data can travel at the speed of light through the fiber optic cables. ISPs and corporate offices are usually connected with each other with the fiber optic cables to provide high speed connectivity.

What is File Server?

A file server is a computer in a network that authenticates the user access in a network such as Windows 2000/2003 Servers.

Define Seven Layers of OSI Model

There are seven layers of the OSI model. The basic purpose of these layers is to understand the communication system and data transmission steps. The seven layers are Application, Presentation, Session, Transport, Network, Data Link and Physical. You can remember the name of these layers by this phrase. "All people seems to need data processing".

Define GSM Technology

GSM is a short range wireless technology and is usually used in the mobile phones, hand help devices, MP3 players, Laptops, computers and in cars.

Tags : Cool Cell Phones Store Save! Instrument Calibration

Thursday, September 9, 2010

Unblock Security Programs By Renaming Exe Files

Malware is becoming much more intelligent in the way that it infects users computers.

In many cases new rogue programs are downloaded and the Hosts File is hijacked, preventing security programs from running or updating.

Many users then believe that they are infected with the Conficker worm or variants of it.

This is not the case and there are ways to deal with this new threat.

Rename the 'exe' files for the security programs, this can be applied to antivus and antimalware programs which then work around the blocks imposed by malware

Simply open your Programs Folder, find the application folder, open it and rename the program itself.

For example: The path to rename the files is: Open My Computer then double click the C: drive. C: > Program Files > Program Name, open the folder and rename the EXE files ONLY.  Whatever you rename then is what will show in task Manager when you execute them.

Also clean your Hosts File, download HostsXpert or HostsMan and use the 'Restore MS Hosts File' function to clean your Hosts and remove all entries to leave a clean Hosts File. Please reboot your PC after this step.

When using Hosts programs it is essential to disable the DNS  Client, simply open Admin Tools and open Services. Scroll down to DNS  Client and click to highlight, in the left pane Stop the service, and then right click the DNS  Client and select 'Properties', it is usually set to 'Automatic', change this to either 'Manual' or 'Disabled', click OK and exit Services.

In many cases your security programs will be able to then connect and update.

Once the malware has been removed, if using Spybot or any other Hosts blocking program you will need to immunize again or import Hosts from hpHosts or MVPS.

This is a very simple method to implement and the majority of users will then be able to update security applications or download antimalware programs from reputable sources.

Friends Link : Garmin nüvi 855 Store Printers Store. LOWER Prices in The Same Item, Let Baldor Motors

Wednesday, September 8, 2010

Online Email Server Test

The problem of SPAM is ever increasing. With the increase in SPAM, there is also an increase in the number of technologies for stopping SPAM.

Five years back, implementing an Email solution was as simple as choosing your Favorite MTA (Postfix, Qmail, Sendmail, Exchange Server or Lotus Domino) and configuring it on a Static IP.

Now if you do the same (and not do anything else), you are very likely to have problems delivering Emails to some body or the other. The Anti SPAM technology used by the recipient will decide that your email is SPAM and your email will be bounced, or worse, land up in Junk Email folder (and deleted by the recipient without checking)!

Since none of the Anti SPAM technologies are dominant, different technologies are used by different email servers. This means that your email could be considered as SPAM by different Email servers for completely different reasons. Sometimes your email could be considered as SPAM by the same Email server citing different reasons at different times.

If your organization is big enough, you can use the "All my other emails are going fine, so problem is on your side" logic and bully the other Email administrator to disable whatever Anti SPAM measure they are taking.

But if the recipient is a bigger organization, the reverse argument could be thrown at you ("We are receiving emails from everybody else, so you better fix your Email Server"). This is a nightmare situation for an Email administrator and this is when you need to learn all the Anti SPAM technologies.

Typically most of the Email delivery problems come about because of the following Anti SPAM technologies.


HELO Greeting Check
Reverse DNS Check
DNSBL (RBL)
SPF
Domain Keys
SPAMAssassin content checks
BATV (Bounce Address Tag Validation)
Greylisting
URIBL
There are other not so widely used technologies that may come into play in a few cases, and if you run into those, Good luck!

Previously, one had to do individual tests for the above and see if any of the above technologies cause a problem. An Online Email Server Test solves this problem by automating the whole process. All you need to do is to send an Email address to a test Email address.

The recipient Email Server analyzes the Email, Email server and its properties and delivers a report giving details of your Email server compliance with respect to all the above technologies.

Related : Printer Transfer Belts Store, LOWER Prices